Illuminated Joystick - Green Bat TopUniversal
Illuminated Bubble Bat Top Joystick
This illuminated bat top arcade joystick features a fixed bat top handle with bubble design and comes supplied with 1 x dust cover, 1 x shaft cover, 1 x cable for connecting to a 12V power supply and 1 x 5-pin cable for connecting the joystick (Up, Down, Left, Right, GND).
The restrictor plate on the joystick can be set to 2, 4 or 8 way by moving the center position of the gate on the bottom of the joystick to your desired position. This illuminated bat top joystick is lit up by LEDs from the PCB, which is located underneath the mounting plate. The LEDs shine up through the transparent shaft cover, which gives the bat top handle an awesome glow.
- 1 x 5 pin joystick cable
- 1 x 2 pin power cable
- 1x Green Bat Top Shaft
- 1x Shaft Sleeve & Dust Plate
- Mounting Plate Dimensions: 97mm x 64mm (L x W)
- Shaft Height: 78mm (not including topper)
- Bat Top Dimensions: 48mm x 35mm (H x W)
- Voltage: 12v
- 2, 4 and 8 way movement
Illuminating the joystick:
Connect the included power cable (red/black) to the PCB and connect the bare ends to a 12V power source and ground. 12V can be taken from a spare molex connector on either a PC power supply (Yellow = 12V, Black = GND) or your arcade power supply.
- Red Wire: Positive
- Black Wire: Ground
Please see our Returns, Refunds & Warranty Policy for details on the warranty of Arcade Parts & Electronics.