Illuminated Joystick - Blue Ball TopUniversal
Illuminated Bubble Ball Top Joystick
This illuminated ball top arcade joystick features a removeable ball top handle with bubble design and comes supplied with 1 x dust cover, 1 x shaft cover, 1 x cable for connecting to a 12V power supply and 1 x 5-pin cable for connecting the joystick (Up, Down, Left, Right, GND).
The restrictor plate on the joystick can be set to 2, 4 or 8 way by moving the center position of the gate on the bottom of the joystick to your desired position. This illuminated ball top joystick is lit up by LEDs from the PCB, which is located underneath the mounting plate. The LEDs shine up through the transparent shaft cover, which gives the ball top handle an awesome glow.
- 1 x 5 pin joystick cable
- 1 x 2 pin power cable
- 1x Blue Ball Top Shaft
- 1x Shaft Sleeve & Dust Plate
- Mounting Plate Dimensions: 97mm x 64mm (L x W)
- Shaft Height: 78mm (not including topper)
- Ball Top Diameter: 43mm
- Voltage: 12v
- 2, 4 and 8 way movement
Illuminating the joystick:
Connect the included power cable (red/black) to the PCB and connect the bare ends to a 12V power source and ground. 12V can be taken from a spare molex connector on either a PC power supply (Yellow = 12V, Black = GND) or your arcade power supply.
- Red Wire: Positive
- Black Wire: Ground