Illuminated Joysticks - Ball TopUniversal
Illuminated Ball Top Joystick
This illuminated ball top arcade joystick features a fixed ball top handle with bubble design and comes supplied with 1 x dust cover, 1 x shaft cover, 1 x cable for connecting to a 12V power supply and 1 x 5-pin cable for connecting the joystick (Up, Down, Left, Right, GND). The restrictor plate on the joystick can be set to 4 or 8 way by rotating the center position of the gate on the bottom of the joystick to the required position. This illuminated ball top joystick is lit up by LEDs from the PCB, which is located underneath the mounting plate. The LEDs shine up through the transparent shaft cover, which gives the ball top handle an awesome glow.
Choice of 3 colors available:
This illuminated ball top arcade joystick is available in 3 colors:
Illuminating the joystick:
Connect the included cables (red/black) to the PCB and connect the bare ends to a 12V power source and ground. 12V can be taken from a spare molex connector on either a PC power supply (Yellow = 12V, Black = GND) or your arcade power supply.
Mounting Plate: Length 97mm x Width 64mm
Shaft height: 78 mm (From top of mounting plate to top of handle)
- 1 x 5 pin Connect cable (To Harness)
- 1 x 2 pin Connect cable (To 12V PSU)
- 1x Ball Top
- 1x Shaft Sleeve & Dust Plate
This item is not included in our 30 Day Warranty Policy as it is a Clearance Item. Please see our Warranty Policy for more details.