Illuminated Joystick - Bat TopUniversal
This high quality illuminated bat top arcade joystick features a very durable design and comes supplied with 1 x dust cover, 1 x shaft cover, 1 x cable for connecting to a 12V power supply and 1 x 5-pin cable for connecting the joystick (Up, Down, Left, Right, GND). The restrictor plate on the joystick can be set to 4 or 8 way by rotating the center position of the gate on the bottom of the joystick to the required position. This illuminated bat top joystick is lit up by LEDs from the PCB, which is located underneath the mounting plate. The LEDs shine up through the transparent shaft cover, which gives the bat top handle an awesome glow.
Choice of 5 colors available:
This illuminated bat top arcade joystick is available in 5 colors - Blue, Green, Red, Yellow and White
- Ball Top Diameter: 34.7mm
- Shaft Length: 49.35mm
Illuminating the joystick:
Connect the included cables (red/black) to the PCB and connect the bare ends to a 12V power source and ground. 12V can be taken from a spare molex connector on either a PC power supply (Yellow = 12V, Black = GND) or your arcade power supply.
Mounting Plate: Length 97mm x Width 64mm
Shaft height: 78 mm (From top of mounting plate to top of handle)
- 1 x 5 pin Connect cable (To Harness)
- 1 x 2 pin Connect cable (To 12V PSU)
- Includes bat top and shaft sleeve
- 4/8 way movement