12v Convex Illuminated Fusion Buttons - 24mmUniversal
12v Convex Illuminated Fusion Buttons - 24mm
Hybrid American style pushbutton with Sanwa type microswitches. Ultra quiet and effortless ease of use.
Gold-plated contacts means:
- No tarnishing nor degradation results in no deterioration in response
- The contact leaves and the external connections are fully gold plated
- 12v Power required for LED illumination.
- Low inertia - the moving part of the button is ultra-light and only 10mm deep (unlike other types where the plunger extends the full depth of the button)
- 'No Click Leaf' switch means no clicking micro-switch
- No Plunger Spring! The body of the button contains no large spring. This results in a uniquely low actuation force of 45 grams for the entire button.
- No Hysteresis. This is the difference in button depression for the contact close and open points. On these buttons the position is the same, resulting in maximum repeated actuation performance. On micro-switch buttons this "dead" distance can be up to 1.5 mm.
- Convex top. Most serious gamers prefer the convex tops over the classic concave which are commonly used on American Style pushbuttons.
- Robust. The limit stop of the button is supported by the button body not the switch so no chance of switch damage owing to over-enthusiastic play!
- Compact integral design. No fiddly assembly after fitting through the panel. Totally enclosed leaf-switch contacts.
- Economic Despite their performance these are similar in price to standard arcade buttons and the price is all-inclusive, nothing extra to pay for add-on switch options.
- Nut & Thread Fixing. We have retained the traditional threaded fixing rather than the push-in design of certain other low-inertia buttons as we believe this gives the most effective permanent mounting in all types of panel up to 19mm (3/4 in).
- 24mm diameter - mounts in a 7/8" hole.
- .110 terminal connections for both the Microswitch & LED
*Stock Image Used. Item received may not be exactly as seen*
- 1 Button
- 1 Button Nut
Wiring Information: Button wiring is 1 wire for ground connection and 1 wire for signal connection. LED wiring is 1 wire for the positive connection and 1 wire for the negative connection.
LED Fusion Button Wiring Diagram