Two Player Standup DIY Arcade Kit - Complete (MAME).
**Starting at $694.99 without optional items.
Our classic 80's style two player standup arcade cabinet in a "Do It Yourself" format!
This kit comes complete with everything you need to build your MAME cabinet except for your PC or Raspberry Pi, an internal power bar and a few screws and a little wire.
Power switch, control top button and joystick openings are cut to fit all of the supplied parts. Coin door, fan and amplifier openings are only cut if you have ordered those respective products with your kit. Please check the boxes above if you would like these openings cut. The monitor mount is cut to the exact size of the selected monitor. A standard VESA monitor mount will be supplied when no monitor is selected.
Player action buttons and coin button can be upgraded to our Fusion (Gold Leaf) Pushbuttons. These pushbuttons are a hybrid, concave, American style, high performance and low noise button. Product information can be found here.
This standup arcade DIY kit works for everyone, This kit is perfect for both beginner and advanced arcade builders. It's hassle free, easy to assemble setup allows for customization at nearly every step.
All pieces are precision cut to order on our CNC from 3/4" black melamine providing perfect panel alignment. T-Mold slot cuts are standard on all orders.
This standup kit is configured for the MAME platform. There is ample room inside the cabinet for all internals and lots of space to keep wiring tidy.
Cabinet assembly is available for an additional charge.Our professional cabinet makers will assemble your DIY standup wood cabinet. All you have to do is install the electronics and monitor and start playing!
25"W x 25"D x 69"H
Monitor Area Measures: 18"H x 23.5"W
Fits 19" Monitor Horizontal or Vertical
Fits 22" Monitor Horizontal
1 Flat Packed DIY "Origin" Stand Up Arcade Kit
12 Concave Player Action Buttons
2 White Printed Player Buttons
1 White Concave Coin Button
1 Pushbutton Nut Wrench
2 Competition HAPP Joysticks
30 1 Metre Wires with .187" Terminals
i-Pac2 Arcade Encoder
2 Ground Harness'
EMI Power Switch
4' Premium Power Cord
27mm Panel Lock
2 Speakers with Black Plastic Grilles
*Screws and electrical wire not included
Rubber mallet, sandpaper or chisel, drill or screwdriver (Robertson #2), and wood glue.
INSTRUCTION MANUAL: CLICK HERE
** ALL DIY kits have a disclaimer etched into the inside of each profile that reads:DIY kit provided by:Retro Active Arcade Ltd.NOT for resale or commercial use.